Wholesale Plumbing Hole Reamer Tools 25mm PEX Pipe Tool For
- Категории: >>>
- Поставщик: Shandong,Efield,Piping,System,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Product Description
Wholesale Plumbing Hole Reamer Tools 25mm PEX Pipe Tool Reamer Tool For PVC Pipe
The reamer tools are used for reaming and rounding pvc pipe before you insert the brass fittings into the pipe.
It is much easier to insert brasss fittings into the pvc pipe after reaming the pipe use this reamer. Most importantly, pipe edge is not sharp after reaming, so it will not break the o-rings on the brass fittings when insert fittings into the pipe.
Specification
The reamer size is 16-20-25. It can be used to reaming plastic pipe with size of 16mm, 20mm, 25mm.
The specification of the plastic pipe should be the same as follows. Both Pex-Al-Pex pipe and Pex pipe
Reamer Size | 16-20-25 |
Pipe OD | 16, 20, 25 |
Pipe ID | 12, 16, 20 |
Pipe Wall thickness | 2.0, 2.0, 2.5 |
Company Profie
About us
Shandong Efield Piping System Co., Ltd. is a manufacturer specialized in research, production and sales of Aluminum-Plastic composite pipes, PE-Xb pipe, PE-Xa pipe, PE-RT pipe, PP-R pipe, brass fittings and ball valves etc. The pipes with insulation and oxygen barrier are available too.
Brass Fitting Factory
We have more than 300 production lines of brass fittings, ball valves and manifolds, with a overall production capacity of more than 10 tons of brass products, including U profile press fittings, compression fittings and screw fittings, Pex sliding fittings, Pex press fittings, and ball valves and so on.
Pipe Factory
We introduce from Germany the most advanced technology of PEX-Al-PEX multilayer pipe, including butt-welded multilayer pipe and overlapped multilayer pipe. We also have labs and cross-linking room of our own, which are equipped with cutting-edge technologies.
Exhibition
Certifications
Efield takes quality as life. From raw materials like Pex, Pe and brass bars, accessories like O-rings and stainless steel sleeves, even plastic bags, cartons and pallets which are used for packaging will be inspected carefully.
We have cross-linking room and labs of our own. Each meter of pipes will be cross-linked and tested before shippment.
AENOR
AENOR Certificate is for Multilayer pipe and Press fittings systems, which will be installed in hot water systems.
SAI GLOBAL
SAI Global Certificate is for multilayer PEX-Al-Pex pipe, which will be installed in natural gas systems in buildings.
WaterMark Certificates
WaterMark Certificates are for Pex pipe and Brass fittings, which will be installed in hot water and cold water systems.
We produced single layer Pex and Double layer pex, both of which are compatible with the certificates.
ApprovalMark certificates
These certificates are for multilayer Pex-Al-Pex pipe, Pe-Al-Pe pipe, ball valves and press fittings, which will be installed in natural gas systems.
These certificates are applicable in the markets of Australia and South America like Peru etc..
CE for PEX systems
Our Pex pipe and brass fittings which will be installed in hot and cold water systems are fully complied with CE certificates.
CE for Pex-Al-Pex systems
The Multilayer Pex-Al-Pex pipe and brass fittings which will be installed in hot and cold water systems are fully complied with CE certificates.
Похожие товары
Новинки - Розница
