Экономичная и практичная кормушка для рыб автоматический
- Категории: Aquaculture Equipment >>>
- Поставщик: Henan,Kunmin,Machinery,Equipment,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Economical And Practical Fish Feeder Automatic Pond
This smart multi-stage controller has a 24-hour eight-cycle cyclic feeding function. Feeding, interval and vibration (discharge amount) are respectively adjustable and automatically saved; up to 8 hours can be set to automatically start, shut down and no material for three minutes to stop automatically (no material priority shutdown). It can be used for a long time after one setting, and it does not need to be set every day.
Product Selling Points
Operation:
1. Timing (set time, proofreading customer local time)
Press the school time button, the lock full graphic in the courseware clock dialog box is on. At this time, set the hour on time, press the minute button to set the minute; after the setting is completed, the set time can be automatically saved after 10 seconds without any operation. Press the power button to save it immediately.
Step: Press Timing ----- hour--- minute---ON Save Settings
2. Time period (set the feeding time, up to eight time slots)
Tap the auto button to select the automatic working mode. Press the time button repeatedly to select any time period from 1 to 8. The cursor flashes for the selected time period. Press the setting button again during the time period, the power-on time flashes.
At this time, press the time and minute button to set the automatic time. When the power-on time is pressed, press the setup button to turn off the power-off time. At this time, press the time and minute button to set the automatic material-off time; when the setting is completed, press the power-on state to be the standby state, and the time will automatically start the work feeding.
Step: Press Automatic---Timing period----setting ---Hour, Minute---Setting(Finish Start time
period)---Setting---Hour, Minute---timing-ON(Finish All )
3. Cancel (cancel unused time)
Tap the Auto button to select the automatic working mode. Press the time period, the cursor will flash for the selected time
period. At this time, press Cancel to cancel the time period and not display the time. If you want to reply, you can set it after
the selected time period. Reset time. When finished, press the power button to work.
Step: Press Automatic---Timing period---Cancel---ON
4. Manual (manually feeding)
Press the manual button in any working state, then press the open button, that is, to realize the material in the machine, no
material is automatically shaved in three minutes; the next time you need to feed. Add the feed, press the power button to work,
and after the material is finished, the material will automatically stop for three minutes.
Step: Press Manual ---ON (Automatic shutdown after three minutes of material)
Product Paramenters
Technical specifications | Technical parameters | ||
Model | KM-150A (high constant speed motor) | KM-150B (Adjustable speed motor) | |
Controller | Automatic control/Semi-automatic control | Variable motor speed control | |
Voltage | 220v/50hz/AC | ||
Motor Power | 150W | ||
Total power | 190W | ||
Motor speed | 2800r/min | 300-288r/min | |
Maximum feed distance | 15m | 1-15m | |
Feeding fan angle | ≥140° | Adjustable | |
Maximum amount of feed | 400kg/h | ||
Feeding box capacity | 2 pack material :80kg 3 pack material :120kg 4 pack material:160kg | ||
Feed breakage rate | ≤5% | ||
Throwing area | ≤275㎡ | Adjustable | |
Continuous feeding time | 1-16s | ||
Interval feeding time | 1-16s | ||
Discharge size | 1-16 degree | ||
Timing control | 0-120 minutes | ||
Time control | Microcomputer chip 8 time | ||
Overall Weight | 30kg | ||
No material shutdown | 3 minutes while no material in | ||
Base material | Copolymer PP material | ||
Box material | 201 stainless steel | ||
Base size | 55*55*45cm | ||
Box size | 2 pack material:59*59*48cm 3 pack material:67*67*48cm 4 pack material:70*70*55cm | ||
Product Display
Похожие товары
Новинки - Розница
