1,75 мм Натуральная нить для 3D-принтера 100 г (нить для принтера HP)
JP uFFE58000-uFFE511000
Kexcelled расходные материалы для 3D-принтера 1 75 мм матовая нить из пла огнестойкий
- Категории: Plastic Rods >>>
- Поставщик: North,Bridge,New,Material,Technology,(suzhou),Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
About Us
Hot Selling
Product Description
PLA K5 is a PLA based printing material with good matte finish.While inheriting the good environmental protection and print ability of PLA substrate, special process adjustment has improved the liquidity problem.Suitable for printing on the surface of a matte or
matte texture of the model.
matte texture of the model.
Specifications: | ||
Filament diameter: | Ø1.75mm Ø2.85mm Ø3.0mm | |
Net Weight: | 0.5kg 1kg 3kg 5kg | |
Tolerance: | ±0.01-0.03mm | |
Colors: | 12 Morandi colors | |
Remark: | More diameters & weight can be customized. Own color-masterbatch technology to customize any color. | |
All Morandi Colors
Unique artistic and recognizable.
Neat Wiring
Eliminate wire bending and winding, bringing a better printing experience.
No Plugging
Efficient dispersion, no plugging caused by the addition of special effects.
Parameters: | ||||||||
*Strict quality control: Enhanced impact strength and high fluidity enable you to print in wider temperature and speed ranges andkeep the surface smooth without warping deformation. Accurate deposition of each layer brings good surface quality. Melt well, feed smoothly and constantly without clogging the nozzle. | ||||||||
*Matte texture: Kexcelled newly launched filament inherited the good printability of PLA. At the same time, it presents a special matte and frosted texture on the surface of the printed model, and the layer pattern has been significantly improved, which can be directly used for decorative or artistic terminal parts. | ||||||||
*Smooth & stable printing: The introduction of porous micro-nano inorganic materials ensures smooth printing, low shrinkage deformation, low warpage, good adhesion to the platform, easy forming, and good forming accuracy. Can be used to print large parts. | ||||||||
*Enhabced toughness: Through the proprietary kexcelled-toughen technology, the impact strength of PLA K5M is greatly improved compared to PLA K5 series. This means that the printed model is less susceptible to damage and more durable. | ||||||||
Printing Tips: | ||
Nozzle temperature: | 210℃-230℃ | |
Platform temperature: | 30℃-60℃ | |
Print speed: | 40-100mm/s | |
Remark: | If you need more product quides and instructions, or you are interested in becoming in our sales agent and business partner, please contact us by email: alibaba@northbridge3d.com. | |
Cooperation Partners
Our 3D printing filament perfectly compatible with 99% FDM 3D printer.
Recommend Products
Packaging & After-Sales
General Packaging:
* Each spool packed in a vacuum-sealed package with a desiccant packet.
* Each roll in a small box,
box size:L21XW21XH7.2cm
* 10 small boxes in a carton box
carton size:L45*W38*H23cm
Packaging also can be customized*_*.
After-Sales:
Kexcelled hopes that everyone can experience the fun of 3D printing, so we provide printing technology guidance and customer service. The email will be answered within 24 hours ASAP *_*.
FAQ
What if the surface of the printed model is not smooth and has defects?
1. First, confirm that the filaments are in a dry state. If the unpacking time is too long, it needs to be dried (PLA series
50-55°C, 3h; PETG, WOOD,ABS, etc. 60-65°C, 4h; TPU, 65-70°C, 4h).
2. Appropriately increase or decrease the amount of extrusion.
3. Clean the throat and nozzle.
4. Check whether the extruder gear is worn.
50-55°C, 3h; PETG, WOOD,ABS, etc. 60-65°C, 4h; TPU, 65-70°C, 4h).
2. Appropriately increase or decrease the amount of extrusion.
3. Clean the throat and nozzle.
4. Check whether the extruder gear is worn.
What to do if the printed filament cannot get onto the platform?
1. Adjust the distance between the nozzle and the platform.
2. Reduce the printing speed of the first layer.
3. Adjust the temperature and cooling settings.
4. Platform surface treatment (platform sticker, glue, and material).
5. Increase brim or raft.
2. Reduce the printing speed of the first layer.
3. Adjust the temperature and cooling settings.
4. Platform surface treatment (platform sticker, glue, and material).
5. Increase brim or raft.
What to do if the nozzle is clogged?
1. Reinstall the filament to see if the new one can be extruded normally.
2. Clean the nozzle and use a fine needle smaller than the nozzle diameter to clean or replace with a new nozzle.
3. Check whether the throat cooling fan is operating normally. Abnormal operation of the fan will cause the consumables to flow. The throat swells in advance and causes the plug.
4. Check whether the throat is aging.
2. Clean the nozzle and use a fine needle smaller than the nozzle diameter to clean or replace with a new nozzle.
3. Check whether the throat cooling fan is operating normally. Abnormal operation of the fan will cause the consumables to flow. The throat swells in advance and causes the plug.
4. Check whether the throat is aging.
What to do with stringing？
1. After each use, the filament should be inserted into the round hole on the side of the material tray, and stuck tightly.
2. If the filament has been threaded, relax and pull out until it is not threaded, then re-wound.
2. If the filament has been threaded, relax and pull out until it is not threaded, then re-wound.
Contact information
Asia Factory & Office
NorthBridge New Material Technology Co.,Ltd
W：www.northbridge3d.com
E: alibaba@northbridge3d.com
T: +86-18962115278
F: +86 (0) 512 65801832
A: Xiangcheng Economic Development Zone, Suzhou City, CHINA
EMEA Warehouse & Office
Northbridge Netherlands B.V.
E: alibaba@northbridge3d.com
NorthBridge New Material Technology Co.,Ltd
W：www.northbridge3d.com
E: alibaba@northbridge3d.com
T: +86-18962115278
F: +86 (0) 512 65801832
A: Xiangcheng Economic Development Zone, Suzhou City, CHINA
EMEA Warehouse & Office
Northbridge Netherlands B.V.
E: alibaba@northbridge3d.com
Похожие товары
Новинки - Розница
