Поделиться:
3x3 BRC 3315 Hot Galvanized Welded Roof Safe Mesh ,safety mesh/netting for roofing safety
3x3 BRC 3315 safety mesh is our hot sale products.It has been exported to many countries,Singpore,Malaysia,Indonesia,etc."33" indicates that the proofing mesh opening is 3 inch,while "15" indicates the wire diameter is 15 gauge.In acutual,the wire diameter is 1.3mm to reduce cost
BRC 3315 safety mesh/netting is a welded ,mild steel wire mesh with galvanized coating.It is attached the roofing framing to eliminate the risk of falls during construction,as well as acting as a support for roofing underlays and insulation.It also provides a permanent safe working environment under skylights and clear composition roofing.
The 3315 roofing safety mesh main infomation as following:
Material:mild steel wire,MS wire.
Mesh opening:3*3' inch 75mm, 3x3 inch
Wire diamter:bwg15 gauge,1.8mm,1.3mm,1.5mm
Finishing:hot dipped galvanized,PVC coating
Width: 6 feet
Length:50 feet 100 feet
Usually,our customer ask for a 1.3mm wire diameter to reduce cost.When inquirying,pls specify the wire diameter for roof safe mesh you required.
Packing:the BRC 3315 roof safety mesh with 6 feet width,100 feet length is packed in roll wrapped by water proof paper,then fixed by iron wire.Loaded into 20gp container in bulk or pallet.
1000 rolls in 20gp container
2000 rolls 3315 proofing mesh in 40HQ container.
BRC 3315 roofing safety mesh welded is used as proofing mesh in construction,it is used together with eps block insulatio board as house proofing.
The roofing safe mesh is attached the roofing framing to eliminate the risk of falls during construction,as well as acting as a support for roofing underlays and insulation.It also provides a permanent safe working environment under skylights and clear composition roofing.
Detailed application: