Фартук-Фидер из сломанного камня большой емкости для

Apron feeder is rugged and dependable to receive and control the flow from bins and hoppers, then feed bulk materials to crushers,belt conveyors and other related mining machinery. As a kind of continuous and evenly feeding equipment, It can be installed in horizontal or gradient slope, which is widely applied in mining, cement, chemical,smelting industry. This machine are allowed to accept bulk materials in lump,graininess with 0.5-2.5t/m3 density, either in normal condition or that of high temperature, high moisture.

The traction chain with long pitch plate pin shaft roller chain, every parts of chain adopts alloy steel material, and through scientific heat treatment, wear-resisting performance is good, high tensile strength, long service life, introduce the stamping groove, the middle use reinforcing rib, the performance is good, large carrying capacity. To prevent material leakage, base plate of trough bottom with circular lap. In order to reasonably choose throughput, the drive motor use speed motor, speed adjustable. A variety of arrangement forms, can level, tilting arrangement, there are a variety of levels and tilt combination arrangement. Single delivery length less than 60m, hoisting height less than 30m. Maximum transmission angle is 75°. Temperature of material is less than 800℃. The models can be divided into light plate feeder, medium plate feeding machine, medium plate feeding machine.

FREE TO VISIT OUR FACTOYR

Passed the ISO9001:2008 quality system authentication and CE authentication.

PROFESSIONAL MANUFACTURER

DELIVERY ON TIME

STANDARD SHIPPING

Packing Details : Big steel parts are nude, small parts or easy to broke will be packed in wooden case..

Delivery Time : 10-30 days after received the prepayment. 

As we make several  kinds of apron feeder, so tell us your demands when inquiry, including the feeding material, the size of feeding material, the capacity, the length you need, the inclination, the feeding way to feed materials on pan, the hopper pressure and your other special demands etc. then we'll recommend you suitable model based on them.

We usually quote within 24 hours after we get your above clear inquiry. And for simple inquiry, you'll get within 1 hour.

After you place a order,the production handling time is about 15-20 days. We need 7-10 days to pack and arrange delivery then 25 working days on average.

After production finished, you can come to visit our factory to check the quality or we send you the pictures and videos of finished products by email. Also, the third-party inspection is accepted too.