Заготовки для головки кабеля из нержавеющей стали машина вставки

 2.5 mm Ball feeding Machine for 4.6 mm wide cable ties ( suitable for both uncoated & coated head blanks ) 

3.17 mm Ball feeding Machine for 7.9 mm ss ties ( suitable for both uncoated & coated head blanks ) 

1:Machine suitability for the ball feeding of Dia - 2.5 mm into 4.6 mm head  & Dia 3.17 mm ball into 7.9 mm Head.

2:After the ball is fed in the head, the notch is to be bend to arrest the ball.

3:Full proof system to be incorporated to put single ball inside the head.

4:If no ball or more than one ball fed in side the ball head  then the machine should shows alarm or stop.

we also have the punching machine to make the head of the

stainless stell of cable tie

we also have the mould for the punching machine which is used in producing stainless steel cable tie.

we also have the Stainless steel Strip Feeding Mechanism 

Stainless Strip Flattening mechanism  

Stainless Strip Pulling mechanism 

 which are used in stainless steel cable tie making